Usage: h3disp [-h/-H] -m [video mode] [-d] [-c [0-2]] ############################################################################ This is a tool to set the display resolution of your Orange Pi by patching script.bin. In case you use an HDMI-to-DVI converter please use the -d switch. The resolution can be set using the -m switch. The following resolutions are currently supported: 480i use "-m 480i" or "-m 0" 576i use "-m 576i" or "-m 1" 480p use "-m 480p" or "-m 2" 576p use "-m 576p" or "-m 3" 720p50 use "-m 720p50" or "-m 4" 720p60 use "-m 720p60" or "-m 5" 1080i50 use "-m 1080i50" or "-m 6" 1080i60 use "-m 1080i60" or "-m 7" 1080p24 use "-m 1080p24" or "-m 8" 1080p50 use "-m 1080p50" or "-m 9" 1080p60 use "-m 1080p60" or "-m 10" 1080p25 use "-m 1080p25" or "-m 11" 1080p30 use "-m 1080p30" or "-m 12" 1080p24_3d use "-m 1080p24_3d" or "-m 13" 720p50_3d use "-m 720p50_3d" or "-m 14" 720p60_3d use "-m 720p60_3d" or "-m 15" 1080p24_3d use "-m 1080p24_3d" or "-m 23" 720p50_3d use "-m 720p50_3d" or "-m 24" 720p60_3d use "-m 720p60_3d" or "-m 25" 1080p25 use "-m 1080p25" or "-m 26" 1080p30 use "-m 1080p30" or "-m 27" 4kp30 use "-m 4kp30" or "-m 28" 4kp25 use "-m 4kp25" or "-m 29" 800x480 use "-m 800x480" or "-m 31" 1024x768 use "-m 1024x768" or "-m 32" 1280x1024 use "-m 1280x1024" or "-m 33" 1360x768 use "-m 1360x768" or "-m 34" 1440x900 use "-m 1440x900" or "-m 35" 1680x1050 use "-m 1680x1050" or "-m 36" 2048x1536 use "-m 2048x1536" or "-m 37" Two examples: 'h3disp -m 1080p60 -d' (1920x1080@60Hz DVI) 'h3disp -m 720i' (1280x720@30Hz HDMI) You can also specify the colour-range for your HDMI-display with the -c switch. The following values for -c are currently supported: 0 -- RGB range 16-255 (Default, use "-c 0") 1 -- RGB range 0-255 (Full range, use "-c 1") 2 -- RGB range 16-235 (Limited video, "-c 2") ############################################################################